Balluff BES060M inductive sensor M18×65, 8 mm, PNP NO, M12 connector

Inductive sensor of the Entry line in a long M18×65 mm housing with 8 mm switching distance. Same electrical data as the BES060P but a different housing length — for mounts designed for a standard long M18.

Type code BES M18ZI-PSC80B-S04G. Switching distance 8 mm, flush mounting, PNP NO output, switching frequency 300 Hz, supply 10…30 V DC. Nickel-plated zinc alloy housing, PBT sensing face, IP67 protection, operating temperature −25…+70 °C. Connection via M12×1 connector (male, 3-pin), 360° LED indication.

Key features:

• Switching distance 8 mm, housing Ø 18 × 65 mm, flush mounting
• PNP NO output, switching frequency 300 Hz
• 360° LED indication — status visible from any side
• M12 connector, 3 pins: solderless connection, quick replacement
• Not interchangeable in length with the short BES060P
• Entry line for standard tasks, IP67

Specifications:

• Type code: BES M18ZI-PSC80B-S04G
• Dimensions: Ø 18 × 65 mm
• Mounting: flush
• Switching distance Sn: 8 mm
• Output: PNP NO
• Switching frequency: 300 Hz
• Supply voltage: 10…30 V DC
• Protection rating: IP67
• Operating temperature: −25…+70 °C
• Housing: zinc alloy, nickel-plated
• Sensing face: PBT
• Connection: M12×1, male, 3-pin
• Indication: 360° LED

Application: Replacement of existing long M18 sensors, position monitoring on frames and gantries.

Scope of supply: Sensor — 1 pc. Cable and mounting hardware are ordered separately.

Before ordering: Before ordering, check the type code against the wiring diagram: PNP or NPN output, number of connector pins and housing length are not interchangeable.