Beckhoff EK1100 EtherCAT coupler, 2×RJ45, for ELxxxx terminals

Beckhoff EK1100 is the head module of an EtherCAT station: it connects the EtherCAT 100BASE-TX network to ELxxxx I/O terminals. Latency approx. 1 µs, E-bus supply up to 2 A, mounting on 35 mm DIN rail. Beckhoff preferred type, in series production.

Up to 65,534 terminals per system, up to 100 m between stations over shielded cable of at least Cat.5. Power contacts 24 V DC / 10 A, 500 V isolation, any mounting position.

Key features:

• EtherCAT 100 Mbit/s, 2×RJ45 interface
• Up to 65,534 terminals per system, up to 100 m between stations
• E-bus 5 V / 2000 mA, power contacts 24 V DC / 10 A
• Latency approx. 1 µs
• −25…+60 °C, IP20, any mounting position

Specifications:

• Protocol: EtherCAT, 100 Mbit/s (100BASE-TX)
• Interface: 2×RJ45
• Power supply: 24 V DC (−15/+20 %)
• Current from Us: 70 mA + (total E-bus current / 4)
• E-bus supply: 5 V / 2000 mA
• Power contacts: 24 V DC / 10 A
• Isolation: 500 V
• Wire cross-section: 0.08–2.5 mm²
• Housing: polycarbonate, 35 mm DIN rail mounting (EN 60715)
• Dimensions: 44 × 100 × 68 mm
• Weight: approx. 105 g
• Operating temperature: −25…+60 °C
• Protection rating: IP20
• Approvals: CE, CCC, UL, ATEX, IECEx, DNV, cFMus

Application: Head module of an EtherCAT I/O station in the control cabinet.

Scope of supply: EK1100 coupler. I/O terminals and end cap are not included.

Before ordering: Before ordering, check the total E-bus current of the connected terminals: above 2 A an EL9410 power feed terminal is required. For exchangeable segments with Hot Connect choose the EK1101.