Pepperl+Fuchs NBB8-18GM50-E2 inductive sensor, M18, PNP NO, 8 mm, flush, 2 m PVC cable

The Pepperl+Fuchs NBB8-18GM50-E2 is a non-contact inductive sensor for detecting metal parts in an M18×1 threaded housing. The increased 8 mm sensing range is retained with flush mounting. PNP normally open output, 3-wire connection, 2 m PVC cable.

Standard target: steel 24×24×1 mm. The sensing range is shorter on aluminium, copper and brass: reduction factors 0.38 / 0.35 / 0.47, and 0.74 for 304 steel. Typical hysteresis 5%.

Key features:

• Increased 8 mm sensing range with flush mounting
• PNP NO output, 3-wire
• Wide supply range 6…36 V DC
• Switching frequency up to 1350 Hz
• IP65 / IP66 / IP67 / IP68 protection

Specifications:

• Part number: NBB8-18GM50-E2
• Principle: inductive, metal
• Rated operating distance sn: 8 mm, flush mounting
• Assured operating distance: 0…6.48 mm
• Output: PNP, NO, 3-wire
• Supply voltage: 6…36 V DC
• Switching frequency: up to 1350 Hz
• Housing: brass, white bronze, M18×1
• Cable: PVC, 2 m, 3×0.34 mm²
• Degree of protection: IP65 / IP66 / IP67 / IP68
• Reduction factors: Al 0.38; Cu 0.35; brass 0.47; 304 steel 0.74
• Hysteresis: typ. 5%

Application: End-position monitoring on machine tools, conveyors, fixtures and packaging lines where an increased sensing range and flush mounting are required.

Scope of supply: Sensor with 2 m PVC cable.

Before ordering: Cable version without M12 connector (connector versions have different suffixes). Do not confuse with NBB8-18GM50-E2-M, which has a different cable, protection rating and supply voltage.