Pepperl+Fuchs OBD1100-R100-2EP-IO-IR diffuse photoelectric sensor, 2–1100 mm, IR, IO-Link, 2 m cable

The Pepperl+Fuchs OBD1100-R100-2EP-IO-IR is an R100 series diffuse photoelectric sensor that detects objects directly without a reflector. Range 2…1100 mm, adjustment range 60…1100 mm, reference target: white card 100×100 mm.

The 850 nm infrared LED depends less on object colour than a red LED, but the light spot is harder to see during setup. On black and shiny surfaces the real range is shorter than the rated range. Two push-pull outputs and IO-Link 1.1, switching frequency up to 1000 Hz, response time 0.5 ms. PC housing 37.1×11×21.5 mm, approx. 10 g.

Key features:

• Works without a reflector
• Range 2…1100 mm, adjustment 60…1100 mm
• 850 nm IR LED — less dependent on colour
• Response time 0.5 ms, up to 1000 Hz
• IP67 / IP69 / IP69K protection

Specifications:

• Part number: OBD1100-R100-2EP-IO-IR
• Mode: diffuse, no reflector
• Range: 2…1100 mm
• Adjustment range: 60…1100 mm
• Emitter: IR LED 850 nm
• Reference target: white card 100×100 mm
• Output: 2 × push-pull + IO-Link 1.1
• Switching frequency / response time: up to 1000 Hz / 0.5 ms
• Housing: PC, 37.1×11×21.5 mm, approx. 10 g
• Cable: 2 m
• Degree of protection: IP67 / IP69 / IP69K

Application: Detecting boxes, lids and parts in areas where a reflector cannot be installed.

Scope of supply: Sensor with cable.

Before ordering: The 1100 mm range is specified for a 100×100 mm white card; it is shorter on black and shiny surfaces — test on the actual object.